Access Control Booths

Two modes are offered as standard:

MOD – Semi-automatic, Manual
EOD – Automatic, Electrical

Model MOD has manually operated doors, which from a locked position, unlock by means of a signal from an electrical remote control, card reader, etc. The door is opened manually and closed automatically by means of a “non hold open” door closing arrangement with adjustable closing speed. The doors are fitted with push/pull handles and are locked with two electro-magnetic locks.

Model EOD has similar features, except that door opening, closing and locking is automatically controlled by electrical operators.

The open/close interval is approximately 4 seconds in the case of models EOD (i.e. 8 seconds in total). In the case of the MOD model, the operating time depends largely on the user. Model MOD will, and EOD can, unlock both doors in the case of electrical power failure. Interior sensing devices monitor the user’s presence. Standard Flow Systems logic is supplied to the interface with cubicle operating components. Controls, Card reader, can be supplied by ourselves or other contractors.

Units are manufactured from fully welded, low carbon steel construction with polished stainless steel, aluminium or powder coated finishes. Glass on door and sides is of 6.35mm – 19mm clear laminated glass or toughened armor.

All units are completely assembled, and factory tested, minimizing installation time. Units are designed to be floor surface mounted. A finished levelled surface with strength of 20Mpa is required, suitable to accept m10 x 100mm H.D. anchor bolts. The cubicle mass varies per model 200kg to 1000kgs. Electrical requirements are 220VAC 15A 50Hz.